GrayTech Software, Inc. 

CAD X11® Common Interface Menu

18 MAIN MENU FUNCTIONS CATEGORIES

1. System Modals 10. Line/Chamfer
2. Blank/Unblank 11. Arc/Circle/Fillet
3. Delete 12. Other Curves
4. Save/Quit/New Drawing 13. Entity Manipulation
5. Entity Characteristics 14. Data Verification
6. Drawing/Pattern Management 15. Extended Geometry
7. Plot/Input/Output 16. Drafting
8. Zoom/Depth/View Control 17. Geometric Analysis
9. Point 18. Additional Applications

FUNCTION KEYS

Definitions of the function keys used in operating the system

• [ = Reject • cY(cy) = Select and Edit
• ] = Operation Complete • cG(cg) = Grid On/Off
• Y(y) = Yes • C(c) = Read Cursor
• N(n) = No • G(g) = Grip Snap
•  R(r) = Repaint the Display • I(i) = Implicit Point Select
• cR(cr) = Refresh the Display • X(x) = Digitize Point
• cX(cx) = Interrupt Repaint or Zoom • P(p) = Point Select
• Z(z)(cZ)(cz) = Window (Zoom) • L(l) = Line Select 
• U(u) = Undo • A(a) = Arc Select
• cU(cu) = Redo • O(o) = Other Curves Select
• F(f) (cF)(cf) = CAD X11 Functions Menu • S(s) = Spline Select
• cP(cp) = Point Menu • T(t) = Text Select
• cL(cl) = Line/Chamfer Menu • F2 = Ring Buzzer
• cA(ca) = Arc/Circle/Fillet Menu • F3 = x,y crosshair printout
• cS(cs) = System Modals Menu • F4 = Read drawing modals file
• cD(cd) = Delete Last Entity • F5 = Macro start 
• cT(ct) = Trim/Extend Curves Menu • F6 = Macro end
• cI(ci) = Implicit Point Menu • F7 = Macro load
• cE(ce) = Terminate Session Recording • F8 = Change Macro Directory

FUNCTION SUBMENUS

1. System Modals

1. Menu Display 10. Tablet Management
2. Region Select Modal 11. Grid Control
3. Display Tolerance 12. Captured Variables
4. System Decimal Places 13. Data Display Mode
5. Session Recording 14. Mouse Buttons Definition
6. Implicit Points 15. Auto Save
7. Entity Highlighting 16. Reserved
8. Modal Banner 17. Display Modal Status
9. Crosshair Size 18. Display Modal Block

2. Blank/Unblank

1. Blank All of a Type 8. Unblank All
2. Blank All Except a Type 9. Unblank All of a Type
3. Blank All 10. Unblank All Except a Type
4. Blank, Select from Type 11. Unblank N1 to N2
5. Blank, Select from All 12. Unblank Levels/Pens/Colors
6. Blank All Except N1 to N2 13. Reverse Blank Status
7. Blank Levels/Pens/Colors

3. Delete

1. All Points 7. All of Displayed Type
2. From Type 8. All of Not Displayed Type
3. From All 9. All of a Level
4. Last Entity 10. Processing Mode
5. All Displayed 11. Duplicates
6. All Not Displayed  

4. Save/Quit/New Drawing

(no submenus)

5. Entity Characteristics

1. Entity Font 8. Default Entity Colors
2. Set Level 9. Coplanar Views
3. Pen 10. Level Name Management
4. Color 11. Geometry Display View(s)
5. Screen Weight 12. Drafting Entity Display View(s)
6. Area Fill 13. Drawing Layout Mode for Entities
7. Cross Referencing 14. Display Characteristics

6. Drawing/Pattern Management

1. Drawing Management 2. Pattern Management

7. Plot/Input/Output

1. Plot File or Print/Plot 10. IGES Interface
2. Create PostScript File 11. Interleaf Interface (Professional)
3. Create Gerber File (Professional) 12. DXF Interface
4. Copy Screen 13. Framemaker Interface (Professional)
5. Bulk Data Output 14. Patran Interface (Professional)
6. Bulk Data Input 15. CGM Interface (Professional)
7. Read Gerber File (Professional) 16. Create HP LaserJet (HP-GL/2) File
8. Read HP-GL (/2) or PCL5 File 17. Point Line Interface (Professional)
9. Read Plot File 18. Create PDf File

8. Zoom/Depth/View Control

1. Zoom Control 9. View Borders On/Off
2. Change Depth 10. Dynamic Mode
3. Change View(s) Displayed 11. Set Construction Plane View
4. Change Work View 12. Hidden Line Removal (Professional)
5. Define Auxiliary View 13. View Dependent Display
6. Z-Clip 14. Output Auxiliary Views
7. View Vectors 15. Drawing Layout (Professional)
8. Allocation of View Display 16. Shading Module (Professional)

9. Point

1. Crosshair Position 10. Create Spline Points
2. Key-In Coordinates 11. On a Line
3. Polar 12. Curve Normal from Point
4. Delta 13. Modify/Replace
5. Vectored 14. On an Entity at a Parameter
6. Circle or Ellipse Center 15. Surface Normal
7. On a Circle at an Angle 16. Text Origin
8. Entity Endpoint 17. Between Two Points
9. Intersect Two Entities

10. Line/Chamfer

1. Crosshair Position 10. Parlel a Line at a Distance
2. Key-In Coordinates 11. Multiple Parallel Lines
3. Join Two Entities 12. Break Line
4. Tangent to Two Entities 13. Segment a Line
5. Infinite Horiz. or Vertical 14. Infinite Status
6. Tanto a Curve 15. Line and Arc String
7. Polar Line 16. Chamfer
8. Thru Point and Parlel a Line 17. Delta
9. Thru Point and Perpto a Curve 18. Reflect Off Surface or Curve

11. Arc/Circle/Fillet

1. Crosshair Position Center 9. Fillet (Tanto Two Curves)
2. Key-in Center 10. Modify/Replace
3. Center Point 11. Dynamic Arc/Circles
4. Center Point and Tanto a Line 12. Inscribed in Three Lines
5. Center Point and Tanto a Circle 13. Crosshair Position Center and Edge
6. Center Point and Point on Edge 14. Tanto Three Curves
7. Through Three Points 15. Divide an Arc into N Segments
8. Modify Radius/Angles

12. Other Curves

1. Splines 5. Polygons
2. Offset Curves 6. Convert Curves
3. Conics 7. Contours
4. String

13. Entity Manipulation

1. Modals 8. Copy and Rotate in 2-D or 3-D
2. Arrays 9. Array Explode
3. Group 10. Stretch
4. Mirror 11. Trim/Extend Curves
5. Translate in 2-D or 3-D 12. Projected Entities
6. Rotate in 2-D or 3-D 13. Group Explode
7. Copy and Translate in 2-D or 3-D 14. Zero Z Coordinates

14. Data Verification

1. Points 11. Drafting Entities
2. Lines 12. Triangle/Rectangle/Hexagons
3. Arc/Circle/Fillets 13. Level/Pen/Color/Weights
4. Splines 14. View of Definition
5. Ellipses 15. Any Entity
6. Hyperbolas 16. All With Pen No. N
7. Parabolas 17. Entity Type Count
8. Arrays 18. Identify
9. Groups 19. List Used Levels
10. General Measurements

15. Extended Geometry (Professional)

1. Single Surface Generation 8. Modify Surface Paths
2. Project with Surfaced Edges 9. Define Lines from Surface
3. General Surface Intersections 10. Draft Curve to Depth
4. Confined Surface Intersections 11. 3-D Spline
5. Project Curve to Surface 12. Cross Section
6. Surface Edge Curve 13. Surface Normals
7. Draft Curve to Surface 14. Modify Surface Parameters

16. Drafting

1. Drafting Modals 10. General Note
2. Dimension Characteristics 11. General Label
3. Cross-Hatching 12. Edit Drafting Entity
4. Detail Magnification 13. Text Editing
5. Arrow on Curve 14. General Note I/O
6. Linear Dimensions 15. Balloon
7. Angular Dimension 16. Geometric Tolerancing
8. Circular Dimension 17. Automatic Recreation
9. Diameter Dimension 18. Centerline

17. Geometric Analysis

1. Spline Analysis 3. 3-D Analysis
2. 2-D Section Analysis 4. Volume from 2-D Sections

18. Additional Applications (Professional)

1. Property Management 2. Design Element Library
 
© 2018 Copyright GrayTech Software, Inc. 
2172 Menomini, Wheaton, IL 60189 
 www.graytechsoftware.com