GrayTech Software, Inc. 

CAD X11® Enhancements in year 2012

  1. Mouse thumbwheel zoom in/out has been implemented. Roll the thumbwheel one click forward to zoom in, one click back to zoom out. This support is only functional when zooming is permitted (not when a dialog is displayed for example) - (release 4.1.247) - Mar 5, 2012
  2. Mouse controlled panning is supported. Press the middle mouse button down and hold it there. A hand cursor will be displayed. Move the mouse as desired to move the drawing around the screen area. Release the button to stop the panning mode. If you do not move the mouse, the middle mouse button down/up sequence will generate the REJECT function key ([) as before. This support is only functional when zooming is permitted (not when a dialog is displayed for example) - (release 4.1.247) - Mar 5, 2012
  3. The Ctrl X hotkey that is used for interrupting a long auto max-min or repaint sequence is now only armed during that process. Therefore, the Ctrl X key is now active in most Windows programs (was not before while CAD X11 was running) - (release 4.1.247) - Mar 5, 2012
  4. A long term problem with infrequent stray diagonal lines on the screen that could not be selected has been resolved. These lines were normally short lines just off the display screen, with a line type other than solid - (release 4.1.247) - Mar 5, 2012
  5. A problem with center justifying text (General Notes) changing the font type to no. 512 has been corrected. This problem was apparent then you center justified text notes (not dimensions or labels) and the font changed and you could not change it back using the font menus. In extreme cases this could 'hang' the CAD X11 program with that drawing because if you did not have 505 or more TrueType fonts loaded, the graphics system would lock up (release 4.1.247) - Mar 5, 2012
 
© 2018 Copyright GrayTech Software, Inc. 
2172 Menomini, Wheaton, IL 60189 
 www.graytechsoftware.com