|
|
|
Parts Listing: All Parts For Sale
|
This is the condenser out of an '81 810. It is in good working order.
Additional Pictures:
1
Show All
|
larger image
|
|
|
|
This is a set of power mirrors off an '81 810. Both mirrors move properly, but the reflective material from the passenger side glass flaked off. I have the glass, it is just clear and thus does not function very well as a mirror. It could be re-coated to fix it.
Additional Pictures:
1
2
3
4
Show All
|
larger image
|
|
|
|
This is a Kyosho Inferno ST 1/8th scale gas truck. It is a Kyosho kit that is basically the Kyosho Inferno with truck style wheels and body. I used it before college for fun, but never ended up racing it as I had planned. It tops out (with this engine) around 48mph. What you see is what you get. The truck has not been run in about 5 years (been away for college and work) and I think it is time to pass it on. The radio is a failsafe JR Alpina PCM which always worked quite well. The engine is a 2.3hp 0.21ci Ofna engine and was always run with 20% nitromethane fuel. The truck has a couple mods such as the front chassis brace and rear sway bar. Please let me know if you are interested. If you purchase via paypal, I should be able to ship it out within 2 days of payment
Additional Pictures:
1
2
3
4
5
Show All
|
larger image
|
|
|
|
This is a Lite Machines 120 electric RC helicopter. It is setup for a Futaba transmitter (which I am keeping for use with my airplanes). It has a Futaba GY-401 heading hold gyro which makes learning to fly so much easier and adds a new dimension to flying in general. This heli will come with two battery packs and the training gear for assistance in learning to fly. I used to fly it regularly (just last year) but it is hard to find the time with recent work. I'm going to stick to airplanes for a bit. I'll sell it for $300 without the GY-401 gyro.
|
larger image
|
|
|
|
Stock 280ZXT F54 engine block. This is from a turbo automatic car, so the oil filter attachment is different from all other L6 blocks as it was used with a factory external oil cooler. It has been steam cleaned, and needs to be bored.
I have the oil cooler parts and any internal parts if you need them. This block is NOT prepped for installation in an 81-84 Maxima. Contact me if you are interested in shipping.
|
larger image
|
|
|
|
This is a set of adapters I machined for my Maxima driver's seat. I have since bolted the seat directly to the floor. It works on the driver and passenger side, but I only have one set (enough for one seat). It puts the seat bottom about stock height. This should work with Recaro Modular, SRD, Orthoped and SE seats.
Additional Pictures:
1
2
Show All
|
larger image
|
|
|
|
This is the fusebox out of an '82 280ZX Coupe. It is in decent condition.
Additional Pictures:
1
2
Show All
|
larger image
|
|
|
|
This is a P90 head with some erosion on one of the water passages. I have all of the solid lifter hardware but do not have the cam. I think this head would be ideal for experimenting with head porting, however, a shop can weld and repair the damage if necessary.
I am willing to sell the hardware separate from the head. Contact me with offers.
Additional Pictures:
1
2
3
Show All
|
larger image
|
|
|
|
Original '76 280Z springs in good shape. Off a 70,000 mile car. Still have factory paint markings on them.
|
larger image
|
|
|
|
Ferrari Dino 14" x 6.5" Cromodora Magnesium Wheel. This was a spare tire out of a 308 GT4. It has the original Michelin XWX 205x70VR14 tire on it (tire not in good shape for continuous use, but does hold air). Please contact me if interested.
Additional Pictures:
1
2
3
4
5
6
7
8
9
Show All
|
larger image
|
|
|
|
'88 300ZX (Z31) NA ECU. Labeled A18-A03 M87. Ideal for custom programming / tuning work on a stock Nissan ECU.
Additional Pictures:
1
Show All
|
larger image
|
|
|
|
BMW 750il automatic transmission. Includes torque converter (still mounted) and plate. This transmission has about 1,500 miles on a rebuild. Please contact me regarding shipping information. It is located outside of Chicago if you are interested in local pickup.
I will consider offers.
|
larger image
|
|
|
|
BMW M70 engine. This is a 5.0L V12 engine with ~37,000 miles on it. It came out of a '91 850i but will fit in both 750il (e32) and 850i (e31) cars. This sale includes all major engine components (water pump, engine fan, alternator, intake manifolds, injectors, fuel rails, exhaust manifolds, oil filter canister, throttle bodies, MAF sensors, engine cover, distributors, plug wires, ignition coils, and some misc gaskets). The injectors are flow tested.
I will consider offers. I have other components as the donor car was completely stripped. I am willing to work on the price through removing or adding components.
|
larger image
|
|
|
|
|
|
|
|
|
|
|
|
|
