GrayTech Software, Inc. 

GTWorks™ Enhancements in year 2004

  1. A Postscript formatted file output function has been implemented at the bottom of the Enhanced Plot II function - menu 7.1 (release 14.2.0 513) - January 13, 2004
  2. The DXF translator has been improved to read in ellipses from DXF files (release 14.2.0 513, DXF build 77) - February 5, 2004
  3. A problem with accessing the Flat Pattern material file has been corrected (release 14.2.0 514) - February 5, 2004
  4. A program abort when trying to access the Flat Pattern Unbend and Construction menus has been corrected (release 14.2.0 514) - February 5, 2004
  5. An error with constructing and unbending 3-D models in Flat Pattern has been corrected (release 14.2.0 515) - February 11, 2004
  6. The Postscript formatted file output function has been updated to include line weight support and remove the error message at the end of the function - menu 7.1 (release 14.2.0 516) - February 17, 2004
  7. An infrequent error where a dimensioning entity has its drafting scale factor modal set to zero is now adjusted when the drawing is displayed (release 14.2.0 516, drafting 46) - February 20, 2004
  8. The Postscript output function has been changed to include rotated paper sizes in the paper size menu and remove the rotation menu (release 14.2.0 517) - February 27, 2004
  9. A problem with the scale of Postscript output of Metric drawings has been corrected (release 14.2.0 520) - June 22, 2004
  10. Modify Entity Level/Pen No. (menu 1.7) has been improved to support changes to entity level, pen number or both (release 14.2.0 520) - June 22, 2004
  11. An infrequent program abort when outputting a wire EDM tool path using six system decimal places has been corrected (release 14.2.0 521) - August 31, 2004
  12. A fatal crash when creating an extruded solid has been corrected (release 14.2.0 521) - August 31, 2004
  13. Support for Bezier Curves/Surfaces, Die Design, FEP, Patran Interface and Pipework Interface have been discontinued (release 14.2.0 522) - September 15, 2004
  14. All arrowhead types for linear, radius and diameter dimensions are now supported when outputting a DXF formatted file (release 14.2.0 526) - November 10, 2004
  15. When generating an IGES formatted file, the drawing/part name is now included in the global section (release 14.2.0 526) - November 10, 2004
  16. When reading a DXF formatted file, each layer defined now defaults to being displayed. Before the default was suppressed (release 14.2.0 526) - November 10, 2004
  17. The Screen Position line option, now named Freehand Or Snap To Grid, will automatically close to the starting line position when you have three or more points already specified and the the ] key or right mouse button is pressed (release 14.2.0 526) -December 2, 2004
  18. Better primary and secondary messages at the top of the GTWorks window are now displayed for line menus 10.1-10.4 (release 14.2.0 527) -December 2, 2004
 
© 2018 Copyright GrayTech Software, Inc. 
2172 Menomini, Wheaton, IL 60189 
 www.graytechsoftware.com